如何将png资源加载到对话框上的图片控件中?
我在 OnInitDialog() 上尝试了以下代码，但没有显示任何内容.
I tried the following code on OnInitDialog() but nothing was shown.
m_staticLogo.SetBitmap(::LoadBitmap(NULL, MAKEINTRESOURCE(IDB_LOGO)));
其中m_staticLogo是静态图片控件，IDB_LOGO是png文件的资源ID.
where m_staticLogo is the static picture control and IDB_LOGO is the resource ID of the png file.
推荐答案
如您所见，::LoadBitmap(以及更新的 ::LoadImage)只处理与 .bmps.到目前为止，最简单的解决方案是将您的图像转换为 .bmp.
As you’ve discovered, ::LoadBitmap (and the newer ::LoadImage) only deal with .bmps. By far the easiest solution is to convert your image to a .bmp.
如果图片有透明度，可以转换成32位ARGB位图(这里有个工具叫AlphaConv 可以转换它).然后使用 CImage 类的 LoadFromResource 方法加载图像.将 CImage 传递给 m_staticLogo.SetBitmap().
If the image has transparency, it can be converted into a 32-bit ARGB bitmap (here is a tool called AlphaConv that can convert it). Then load the image using the CImage class LoadFromResource method. Pass the CImage to m_staticLogo.SetBitmap().
但是如果你真的需要它是一个.png，它是可以做到的.
But if you really need it to be a .png, it can be done.
方法1(更简单的方法):使用CImage::Load从文件中加载.png.将 CImage 传递给 m_staticLogo.SetBitmap().
Method 1 (the easier way): Load the .png from a file using CImage::Load. Pass the CImage to m_staticLogo.SetBitmap().
方法 2(更难的方法): 通过将资源加载到 COM IStream 并使用 .png 从资源中加载代码>CImage::加载.(注意:CImage::LoadFromResource 看起来很诱人，但不适用于 .png 图形).要将资源放入 COM IStream，请参阅 此 Codeproject文章.请注意本文适用于 Gdiplus::Bitmap 但关键部分是如何创建 IStream，您应该能够适应 CImage.最后，将 CImage 传递给 m_staticLogo.SetBitmap().
Method 2 (the harder way): Load the .png from a resource by loading the resource into a COM IStream and using CImage::Load. (NOTE: CImage::LoadFromResource looks tempting but will not work with a .png graphic). To get the resource into a COM IStream, see this Codeproject article. Note the article works with Gdiplus::Bitmap but the key part is how to create the IStream, which you should be able to adapt for CImage. Finally, pass the CImage to m_staticLogo.SetBitmap().
更新为使用CImage，比Gdiplus::Bitmap更容易.
Updated to use CImage, which is easier than Gdiplus::Bitmap.
相关文章